fbpx

Welcome to HYDRO TECH CLEAN ENERGY CO

India’s Leading HHO Kits Manufacturer and Engine Carbon Cleaning Machines Experts

Hydro Tech Clean Energy Co is India’s Leading Company works on world famous WATER TO HYDROXY (HHO) gas technology. This unique technology works is proven by world’s famous research centers like NASA, ISRO, USA University etc. After many years Research Company has develop HHO Carbon Cleaning Machine, HHO Carbon Cleaner, HHO kits for Two Wheeler, Three wheeler, Car, and Truck etc. These kits decrease the fuel consumption by up to 60% and also decrease the pollution gases (CO,NOx) up to 80% generated by the engine. Now Thousands of Satisfied Consumers are making us more passionate and Innovative.

How HHO Kits Works

HHO kits are the machine that breaks water (H2O) to molecules by electrolysis and make HHO gas. This gas contains Hydrogen-Oxygen molecules. When we intake this HHO gas in Air-Intake of the engine then it mix with air-fuel in the combustion chamber and burn with it and boost the burning efficiency of the fuel, and helps to burn fuel completely.

Advantages of HHO Gas

* It helps to burn the unburned fuel (Also called carbon) completely, which increase the mileage up to 60% and more.
* Its cleans Engine carbon and stop future carbon building.download (1)
* It increases the pick-up of the vehicle.
* It Reduce the maintenance costs of vehicle.

* Prolongs Engine Life
* It also reduce the pollution (CO, NOx) generated by the engine.

Carbon Cleaning Machine Tutorial

Carbon Cleaning Machine For Heavy Engine

Types Of HHO Cell

HHO technology is world proven and more than 30 years old technology and now more than 40 Countries are working on it seriously, there are two main design in this Technology, refers HHO wet cell and HHO dry cell. In starting Age of this invention wet cell was the basic design but as more technology invented The dry cell models take place over wet cell due to its durability and performance.

 

Wet Cell :- The wet cell design is normally design in a bottle shape container where water and both electrodes are in same chamber

Dry Cell :- Each plate of the cell which represents the anode and cathode (electrodes) are sealed by a water-tight gasket, or rubber o-ring. The electrical connections are connected to the outside perimeter of each plate, meaning the connections remain clean and dry. These plates are bolted on together from the dry perimeter edge, using nylon type washers to prevent a shortage of the polarities.The dry HHO cell design can be seen as a chamber for each cell. The best way to describe it in words is to imagine a square plate which has a circle approximately ½ to ¾ the width of the square. This circle is the closed chamber where the electrolysis process takes place. This is the first advantage over the wet type.

Wet Cell Vs Dry Cell

Wet Cell

  • Wet cell is 20 Years old technology and now not in trend in entire world
  • The wet cell design is normally design in a bottle shape container where water and both electrodes are in same chamber
  • The wet cell generates more heat due to the electrodes and water are in same chamber
  • Wet cell gets more Amps than Hydro tech dry cell because currant runs in whole chamber of water
  • The wet cell positive electrodes create corrosion as oxygen attacking the more surface
  • To produce more HHO, you need to give more electrolyte and need more big plates which is not possible
  • Wet cell life is half than the Dry cell Models due to Corrosion, more amps and Heat
  • Wet cell need more maintenances due to corrosion
  • Wet cell can generate Steam due to its heating issue
  • Wet cell model cannot be slim and small if required gas is more then 1 LPM
  • Due to the factor of Heat and corrosion, wet cell got leaked easily, but we work on same and our only wet cell model Hydro tech wet cell for bike up to 150 cc is leaked proof due to so much Research and specially designed unit with step down Dc convertor to drawn less amps and its only compatible with 150 cc model because wet cell can work only in less gas production
  • This model manufactures in very less cost
  • So in nutshell, if you need A cell in low cost and can take risk of more amps and less life then can go with wet cell

Dry Cell

  • Dry cell is latest design of HHO technology ,now entire world is using the same for HHO production
  • Hydro tech Dry cell are basically the design improvement over wet cell , here we have reservoir and cell apart, and importantly electrodes plate placing is the key factor to generate more pure gas
  • Dry cell Generates less heat than wet cell because here currant runs in the dry cell chamber only
  • HHO dry cell Kits gets less ampears as electricity runs in only cell chamber and gasket not in whole water
  • There is no corrosion in Hydro tech HHO dry cell model
  • The Dry cell can makes any amount of desired HHO due to its chamber facility on less ampears
  • Dry cell Life is double than the wet cell due to its design , less amp and no corrosion
  • Hydro tech dry cell doesn’t need maintainance as wet cell model
  • Hydro tech Dry cell are design specially to run on less amps and no heat issues, so it doesn’t creates steam
  • HHO Dry cell are more slim and compact for any HHO output required
  • Dry cell models are leak proof and long life designs

Welcome to Our Store
Q: 1. What is HHO gas?

A: HHO gas or “Brown’s  Gas” or HYDROXY/ OXYHYDROGEN GAS  is obtained by electrolysis of water. Water(H2O)  molecule is broken into two molecules of hydrogen and one oxygen(HHO).

Q:How its work in my bike engine  ?

A: Our  HHO on demand kit broke the water molecule and make HHO gas, which goes to bike engine with air and simply improves the combustion process of the fuel. It helps to burn your engine fuel completely. A typical engine wastes up to 80% of the fuel in the form of heat. With the use of a HHO  the combustion is more complete, transferring more energy to motion and power instead of heat.

Q: How can I use it ? I have to add a HHO gas cylinder in my bike ?

A: No, you don’t need any cylinder. Our HHO kit is very small (1.5 inch x 5 inch) and very easy to install in any bike. The HHO gas that is being produced by the on demand kit is not stored at all. It is being used as it is produced.  The typical user of an HHO on demand  kit have reported 20% to 50% increases in fuel savings.

Q: 2. What fuel economy will get when using HHO generator?

A: You can increase your mileage by 50%. If you traveled on a single tank of fuel 500 km, now to ride 750 or approximately 30% fuel savings.

 Q: 4. How much current it will take ?

A:  Our HHO kit run on very low current (0.25 to 0.90 amp only).  Bike’s alternator producing approx 4 amp current when engine start, so HHO kit runs on that current. You can also install our kit in those bikes who don’t have battery or have old battery.

Q: When I have to fill water in HHO kit ?

A: You have to just fill 100ml water after 2000KM runs.

Q:  What is the life of this HHO kit ?

A : Kit’s life is minimum 75000 KM. It has one year warranty also.

Q: How I will fix it in my bike ? My City’s bike mechanic don’t know about this technology?

A: In many countries this technology is using from last twenty years but in India its not so popular. No problem for that, we make our system very easy to install. Any bike mechanic can do it with our INSTALLATION MANUAL. Installation manual come with every kit and Installation videos also available.

Q : How much time it will take to install ?

A: Installation time only 20 Minute even if mechanic OR you doing it first time.

Q: 6. Do I need pulse width modulator (PWM)?

A: With our HHO generators do not need pulse modulator, because they are optimized to the point where many times more productive when fed directly to DC (DCV) of the vehicle. Wide-pulse modulation does not work efficiently with HHO generator such as “Dry cell”, the second generation systems and produced since 2008. Frequency modulation is very effective in other types of generators that are technically designed for this purpose.

Q: 7. What happens to gas after Brown’s gas works when engine stop?

A: By turning the key to position the engine shut off system stops producing Brown’s gas engine and adds a few bars to standstill and he has consumed already this gas.

Q: 8. In winter you freeze water into HHO generator?

A: In the winter we use a concentrated electrolyte so as -28 degrees and more, no problem.

Q: 9. Do not heat the engine if it works with Brown’s gas?

A: The operating temperature of the motor is increased – rather low. HHO gas burns very quickly and with its combustion engine serves as the main catalyst for fuel. Get better combustion inside the cylinder. The combustion chamber is designed so that withstands high temperatures and cools well. Radiation is received by the poor burn-opening of the exhaust valve does not go well exhaust (real fire) – this is what raises the temperature of the engine. After the tests made at the Institute of Internal Combustion obtained results, the temperature of combustion (for petrol and diesel) is lower than  the cars was only used petrol or diesel without Brown’s gas.

Q: 10. Can you return the generator?

A: You can return  in 7 days  the product purchased by commercial packaging intact, unused and in good condition and a document with which you purchased it.

Q: 11. What you give a guarantee for the hydrogen generator?

A: As a manufacturer with proven quality We give you a warranty period of two years, full warranty.

Q: 12. Is not there a risk of explosion?

A: There is no danger of explosion because HHO gas rumble when you have strong spark or above 570 degrees Celsius. In practice, this is impossible when all elements are protected from hot parts and components of the vehicle and also lacks spark. The entire system is also airtight and does not leak Brown’s gas. In case of mechanical damage caused by disaster or other reasons, all the electronics in the car is stopped automatically, which means that the HHO generator stops working and if the generator itself is mechanically damaged due to damage caused by accident, it just stops producing gas because water will flow out on the ground.

Q: 13. Do I need to declare in Vehicles Dept. if in the car is fitted Hydrogen Generator?

A: You do not need to do anything  because you did not change the car. A separate system is not subject to technical inspection for lowest pressure according the EU regulations, but just in case you can check it out how it is in your country cause of different legislation.

Q: 14. Can this system improve the efficiency of the engine of my car?

A: One-third of Brown’s gas was 100% oxygen, allowing more complete and faster burn of the primary fuel in this case is the Brown gas and catalyst. For better, better and faster burning fuel-air mixture have a higher efficiency of the engine.

Q: 15. In what kind of engines hydrogen generator work?

A: It will work with all engines with all fuels, operating internal combustion engines currently used – petrol, diesel, LPG, CNG.

Q: 16. Whether oxyhydrogen generator produces the short or long term harm to my engine?

A: No, Brown’s gas generator does not cause any problems to the engines. Practically no water access to the engine. It is located in the generator, which uses electrolysis converts it to Brown’s gas that enters the engine through the intake manifold and is protected by back fire.

Q: 17. Why do car manufacturers have not adopted this technology in production?

A: Car manufacturers are not interested to implement vodordni generators in their cars because it will make them much cheaper and make meaningless injection systems, common rail and other innovations. New developments in the automotive industry makes cars more expensive and hence the profits of their producers higher. Impossible is such a huge industry to lightly tossed all his works, which won many to return to normal engines and carburetors to implement Hydrogen generators. Gas Generator Brown defeats all new vehicles fuel system, created over the years to achieve fuel economy.

A second factor is the cost of fuel – while fuel prices are still low there will be little financial incentives for this system. Stanley Meyer’s patents do not contribute to public control over this energy. Designed from the outset to work with this technology, vehicles can run on 100% water. Neither the oil companies nor the government wants to see a multibillion-dollar industry destroyed. Oil companies reported the biggest gains from any other industry on earth. Member gather huge amounts of duty and tax.

Q: 18. What maintenance is required for gas generators Brown?

A: Every 500-700 km. mileage will need topping up the tank system around 300ml. distilled water. Every 20,000 to 30,000 miles or depending on the amount of use, it is recommended to flush the system and load again with distilled water and electrolyte (Potassium hydroxide flakes).

Q: 19. What is the electrolyte used?

A: Potassium хъдрожиде (KOH). Located in most chemical stores.

Q: 20. What if I do not use distilled water in my generator what will happen?

A: Distilled water is pure water. With other types of water like tap water, mineral water, pond water, sea water, etc., the generator will work, but it will also lead to easier deposition of minerals and impurities that are in the water and electrolyte will become boiling “mud.” This clay will be glued on the generator plates and act as an insulator causing lower production of HHO gas.

Q: 21. In case of an accident will the Hydrogen Generator blow you?

A: Absolutely not, everything that can happen is that there will be water and electrolyte on the ground and the engine oil will turn into soap.

Q: 22. Can I use HHO generator for saving fuel in diesel back up power generator?

A: HHO generators can be used in all internal combustion engines and devices working with fossil fuels, particularly for electricity generator should provide more data on the working volume of the unit and what power is like kilowatts (KW), to prepare technical assessment of what model HHO generator you will need. Do not forget that there are very serious electricity generators.

Q: 23. What is the lifespan of the fuel cell?

A: The materials that are made from non-corrosive, and basic items like vanes can be recycled by us , but it will be soon after 4-5 years of work.

[rev_slider alias="ISO-9001-CERTIFIED-COMPANY-Hydro-Tech-Clean-Energy-Co---Mr-Shubham-Sharma-Founder"][/rev_slider]